Which operating system(s) are supported for production Hadoop
deployment?
The main supported operating system is Linux. However, with some
additional software Hadoop can be
deployed on Windows.
What is the role of the namenode?
The namenode is the "brain" of the Hadoop cluster and
responsible for managing the distribution blocks
on the system based on the replication policy. The namenode also
supplies the specific addresses for the
data based on the client requests.
What happen on the namenode when a client tries to read a data
file?
The namenode will look up the information about file in the edit
file and then retrieve the remaining
information from filesystem memory snapshot. Since the namenode
needs to support a large number of
the clients, the primary namenode will only send information
back for the data location. The datanode
itselt is responsible for the retrieval.
What are the hardware requirements for a Hadoop cluster (primary
and secondary namenodes and
datanodes)?
There are no requirements for datanodes. However, the namenodes
require a specified amount of RAM
to store filesystem image in memory Based on the design of the
primary namenode and secondary
namenode, entire filesystem information will be stored in
memory. Therefore, both namenodes need to
have enough memory to contain the entire filesystem image.
What mode(s) can Hadoop code be run in?
Hadoop can be deployed in stand alone mode, pseudodistributed
mode or fullydistributed
mode.
Hadoop was specifically designed to be deployed on multinode
cluster. However, it also can be deployed
on single machine and as a single process for testing purposes
How would an Hadoop administrator deploy various components of
Hadoop in production?
Deploy namenode and jobtracker on the master node, and deploy
datanodes and taskstrackers on
multiple slave nodes. There is a need for only one namenode and
jobtracker on the system. The number
of datanodes depends on the available hardware
What is the best practice to deploy the secondary namenode
Deploy secondary namenode on a separate standalone machine. The
secondary namenode needs to be
deployed on a separate machine. It will not interfere with
primary namenode operations in this way. The
secondary namenode must have the same memory requirements as the
main namenode.
Is there a standard procedure to deploy Hadoop?
No, there are some differences between various distributions.
However, they all require that Hadoop jars
be installed on the machine. There are some common requirements
for all Hadoop distributions but the
specific procedures will be different for different vendors
since they all have some degree of proprietary
software
What is the role of the secondary namenode?
Secondary namenode performs CPU intensive operation of combining
edit logs and current filesystem
snapshots. The secondary namenode was separated out as a process
due to having CPU intensive
operations and additional requirements for metadata backup
What are the side effects of not running a secondary name node?
The cluster performance will degrade over time since edit log
will grow bigger and bigger. If the secondary
namenode is not running at all, the edit log will grow
significantly and it will slow the system down. Also,
the system will go into safemode for an extended time since the
namenode needs to combine the edit log
and the current filesystem checkpoint image.
What happen if a datanode loses network connection for a few
minutes?
The namenode will detect that a datanode is not responsive and
will start replication of the data from
remaining replicas. When datanode comes back online, the extra
replicas will beThe replication factor is
actively maintained by the namenode. The namenode monitors the
status of all datanodes and keeps
track which blocks are located on that node. The moment the
datanode is not avaialble it will trigger
replication of the data from the existing replicas. However, if
the datanode comes back up, overreplicated
data will be deleted. Note: the data might be deleted from the
original datanode.
What happen if one of the datanodes has much slower CPU?
The task execution will be as fast as the slowest worker.
However, if speculative execution is enabled, the
slowest worker will not have such big impact Hadoop was
specifically designed to work with commodity
hardware. The speculative execution helps to offset the slow
workers. The multiple instances of the same
task will be created and job tracker will take the first result
into consideration and the second instance of
the task will be killed.
What is speculative execution?
If speculative execution is enabled, the job tracker will issue
multiple instances of the same
task on multiple nodes and it will take the result of the task
that finished first. The other
instances of the task will be killed.
The speculative execution is used to offset the impact of the
slow workers in the cluster. The jobtracker
creates multiple instances of the same task and takes the result
of the first successful task. The rest of the
tasks will be discarded.
How many racks do you need to create an Hadoop cluster in order
to make sure that the cluster
operates reliably?
In order to ensure a reliable operation it is recommended to
have at least 2 racks with rack placement
configured Hadoop has a builtin
rack awareness mechanism that allows data distribution between
different racks based on the configuration.
Are there any special requirements for namenode?
Yes, the namenode holds information about all files in the
system and needs to be extra reliable. The
namenode is a single point of failure. It needs to be extra
reliable and metadata need to be replicated in
multiple places. Note that the community is working on solving
the single point of failure issue with the
namenode.
If you have a file 128M size and replication factor is set to 3,
how many blocks can you find on the
cluster that will correspond to that file (assuming the default
apache and cloudera configuration)?
6
Based on the configuration settings the file will be divided
into multiple blocks according to the default
block size of 64M. 128M / 64M = 2 . Each block will be
replicated according to replication factor settings
(default 3). 2 * 3 = 6 .
What is distributed copy (distcp)?
Distcp is a Hadoop utility for launching MapReduce jobs to copy
data. The primary usage is for copying a
large amount of data. One of the major challenges in the Hadoop
enviroment is copying data across
multiple clusters and distcp will allow multiple datanodes to be
leveraged for parallel copying of the data.
What is replication factor?
Replication factor controls how many times each individual block
can be replicated –
Data is replicated in the Hadoop cluster based on the
replication factor. The high replication factor
guarantees data availability in the event of failure.
What daemons run on Master nodes?
NameNode, Secondary NameNode and JobTracker
Hadoop is comprised of five separate daemons and each of these
daemon run in its own JVM.
NameNode, Secondary NameNode and JobTracker run on Master nodes.
DataNode and TaskTracker
run on each Slave nodes.
What is rack awareness?
Rack awareness is the way in which the namenode decides how to
place blocks based on the rack
definitions. Hadoop will try to minimize the network traffic
between datanodes within the same rack and
will only contact remote racks if it has to. The namenode is
able to control this due to rack awareness
What is the role of the jobtracker in an Hadoop cluster?
The jobtracker is responsible for scheduling tasks on slave
nodes, collecting results, retrying failed tasks.
The job tracker is the main component of the mapreduce
execution. It control the division of the job into
smaller tasks, submits tasks to individual tasktracker, tracks
the progress of the jobs and reports results
back to calling code.
How does the Hadoop cluster tolerate datanode failures?
Since Hadoop is design to run on commodity hardware, the
datanode failures are expected.
Namenode keeps track of all available datanodes and actively
maintains replication factor
on all data.
The namenode actively tracks the status of all datanodes and
acts immediately if the datanodes become
nonresponsive.
The namenode is the central "brain" of the HDFS and
starts replication of the data the
moment a disconnect is detected.
What is the procedure for namenode recovery?
A namenode can be recovered in two ways: starting new namenode
from backup metadata or promoting
secondary namenode to primary namenode.
The namenode recovery procedure is very important to ensure the
reliability of the data.It can be
accomplished by starting a new namenode using backup data or by
promoting the secondary namenode
to primary.
WebUI
shows that half of the datanodes are in decommissioning mode.
What does that mean? Is
it safe to remove those nodes from the network?
This means that namenode is trying retrieve data from those
datanodes by moving replicas to remaining
datanodes. There is a possibility that data can be lost if
administrator removes those datanodes before
decomissioning finished .
Due to replication strategy it is possible to lose some data due
to datanodes removal en masse prior to
completing the decommissioning process. Decommissioning refers
to namenode trying to retrieve data
from datanodes by moving replicas to remaining datanodes.
What does the Hadoop administrator have to do after adding new
datanodes to the Hadoop
cluster?
Since the new nodes will not have any data on them, the
administrator needs to start the balancer to
redistribute data evenly between all nodes.
Hadoop cluster will detect new datanodes automatically. However,
in order to optimize the cluster
performance it is recommended to start rebalancer to redistribute
the data between datanodes evenly.
If the Hadoop administrator needs to make a change, which
configuration file does he need to
change?
Each node in the Hadoop cluster has its own configuration files
and the changes needs to be made in
every file. One of the reasons for this is that configuration
can be different for every node.
Map Reduce jobs are failing on a cluster that was just
restarted. They worked before restart. What
could be wrong?
The cluster is in a safe mode. The administrator needs to wait
for namenode to exit the safe mode before
restarting the jobs again
This is a very common mistake by Hadoop administrators when
there is no secondary namenode on the
cluster and the cluster has not been restarted in a long time.
The namenode will go into safemode and
combine the edit log and current file system timestamp
Map Reduce jobs take too long. What can be done to improve the
performance of the cluster?
One the most common reasons for performance problems on Hadoop
cluster is uneven distribution of the
tasks. The number tasks has to match the number of available
slots on the cluster
Hadoop is not a hardware aware system. It is the responsibility
of the developers and the administrators
to make sure that the resource supply and demand match.
How often do you need to reformat the namenode?
Never. The namenode needs to formatted only once in the
beginning. Reformatting of the namenode will
lead to lost of the data on entire
The namenode is the only system that needs to be formatted only
once. It will create the directory
structure for file system metadata and create namespaceID for
the entire file system.
After increasing the replication level, I still see that data is
under replicated. What could be wrong?
Data replication takes time due to large quantities of data. The
Hadoop administrator should allow
sufficient time for data replication
Depending on the data size the data replication will take some
time. Hadoop cluster still needs to copy
data around and if data size is big enough it is not uncommon
that replication will take from a few minutes
to a few hours.
1 comments:
This article was very helpful Hadoop Admin Online course
EmoticonEmoticon